Product Description
Custom e-commerce shipping mailers in two styles: tear-resistant poly mailers — multi-layer co-extruded film with a permanent self-seal strip, built to survive conveyor belts, rain and rough handling — and padded bubble mailers that add a cushioning bubble lining for fragile contents. Both come in any Pantone-matched color, any size, printed with your logo.

A shipping mailer is the only part of your store the customer physically touches before the product — it is the unboxing. A colored poly mailer with a printed logo replaces a plain grey bag with a brand moment; an interior-printed flap adds a thank-you note at zero packing effort. On the operations side, co-extruded PE film resists tears and punctures that destroy cheaper single-layer bags, the self-seal strip closes in one press (faster than tape, no dispenser needed), and the light weight cuts freight compared with boxes. Because both styles run on continuous high-speed lines with no molds, stock specifications start at one roll, with custom colors, sizes and printing quoted from small runs.

Two Styles, Two Jobs
Tear-Resistant Poly Mailers
The workhorse. Co-extruded PE film (2–3 layers) with a white inner layer and a colored or black outer face; side gussets; permanent adhesive flap.
Strengths: extremely tear- and puncture-resistant, water-resistant, ultra-light (cuts shipping cost), lowest cost per mailer.
Best for: apparel, textiles, soft goods, books, boxed items, subscription boxes.
Padded Bubble Mailers
The protector. PE bubble lining heat-bonded inside a poly or kraft-paper outer; self-seal strip.
Strengths: cushions shocks and edge impacts for fragile contents; still far lighter and slimmer than a box + fill.
Best for: cosmetics, electronics accessories, jewelry, ceramics, media, small hardware.
Most e-commerce operations stock both: poly mailers for the soft-goods majority, bubble mailers for anything that rattles. Ordering both from one line keeps colors, print quality and lead times consistent — and consolidates freight.

Specifications
| Attribute | Detail |
|---|---|
| Product name | Custom Shipping Mailers — Tear-Resistant Poly Mailers & Padded Bubble Mailers |
| Film (poly style) | Co-extruded PE, 2–3 layers, 40–80 μ total; classic white/grey-black inner + colored outer; custom layer colors |
| Film (bubble style) | PE bubble lining + PE or kraft-paper outer; bubble Ø 6–10 mm |
| Sizes | Poly: 15×20+3 to 40×60+4 cm (gusset) · Bubble: 12×18 to 35×50 cm; fully custom |
| Colors | White, grey, black, pink, green, yellow, purple, blue, transparent, any Pantone-matched shade |
| Closure | Permanent self-seal adhesive flap (standard); tamper-evident and resealable options |
| Printing | 1–6 color flexo, outside faces and inside flap (thank-you print); both sides printable |
| Security options | Tamper-evident void prints, sequential barcodes, “SECURITY” strip printing |
| Opacity | Opaque co-ex standard (contents hidden); semi-transparent on request |
| Eco options | Recycled PE (30–100%), PBAT+PLA compostable, paper bubble mailers, down-gauged film |
| Packaging | Rolls or flat-packed in cartons; printed cartons and pallet programs available |
| Certifications | Produced under FDA-audited quality system; ISO partner network (FDA/LFGB/REACH/RoHS/FSC/BSCI across group) |
| MOQ | 1 roll (stock specs) · custom color/size/print quoted at small-run minimums |
| Lead time | 7–15 days after artwork approval |
| Sample | Free stock samples; printed pre-production sample from your artwork |
Size Guide — Match the Mailer to the Product
Sizing rule: mailer width = product width + 2–3 cm; length = product length + flap + ~5 cm. A mailer that’s too tight needs force to close (splits at the seam); too loose wastes film and lets contents shift.
| Size (W×L+flap) | Style | Fits |
|---|---|---|
| 15×20+3 cm | Poly / bubble | Jewelry, small cosmetics, cards, accessories |
| 18×26+3 cm | Poly / bubble | T-shirts folded, small books, phone accessories |
| 22×30+3 cm | Poly / bubble | Shirts, cosmetics sets, medium books |
| 25×35+4 cm | Poly | Hoodies folded, shoe boxes (flat), soft bundles |
| 30×40+4 cm | Poly | Apparel bundles, multi-item orders |
| 34×45+4 cm | Poly | Large apparel, bedding pieces, boxed goods |
| 40×60+4 cm | Poly | Blankets, large soft goods, wholesale bundles |
| 35×50 cm | Bubble | Ceramics, glassware sets, framed items |
Branding the Last Mile
| Placement | How | Effect |
|---|---|---|
| Outer face, 1–2 colors | Logo + wordmark on the colored film | The parcel is recognizable from the doorstep — the cost/value sweet spot |
| Full-face print | 4–6 color flexo covering the bag | The signature colored-mailer look of DTC brands — high memorability |
| Interior flap print | Thank-you note, care tips, promo code inside the flap | Discovered at opening — a coupon that can’t be misplaced before unboxing |
| Tamper-evident strip | “SECURITY” or void print over the seal | Visible tamper protection for high-value goods |
| Sequential barcode | Variable-number flexo/inkjet | Order tracking without extra labels |
How They’re Built
- Co-extrusion. Two or three PE layers are extruded together into one film — e.g. black core for opacity, white inner, colored outer. Layering is where tear resistance comes from: a nick in one layer doesn’t propagate through the others.
- Bubble lamination (bubble style). PE bubble sheet is heat-bonded to the outer film at the edges only, so the cushioning stays lofty until it reaches the customer.
- Flexo printing. Your artwork is mounted on photopolymer plates; outside faces and the inside flap print in the same pass. Plates are stored free for identical re-orders.
- Folding & gussetting. Side gussets are folded in so the mailer expands to carry boxed items without straining the seams.
- Adhesive application. The permanent self-seal strip is applied to the flap and covered with release liner — the strip must be protected until the moment of sealing.
- Conversion & QC. Bags are cut, sealed, counted onto rolls or stacked flat, then sampled for seal strength, drop performance and print registration against the approved sample.
Packing with them well
- Leave 2–3 cm of width slack — an overstuffed mailer fails at the side seams, not the seal.
- Press the full flap length with flat palm pressure; partial pressing causes the classic “opened in transit” claim.
- For sharp-cornered boxes, size up or add a corner of bubble wrap at the contact points.
- Keep mailers away from sunlight and heat; adhesive and film both age faster in heat.
- Store adhesive-flap mailers flap-down on a clean surface — dust kills the bond before you do.
Applications
| Use Case | Recommended Style | Why |
|---|---|---|
| Apparel & fashion e-commerce | Poly, brand color, full-face print | Light (low freight), soft-goods safe, brand moment at the door |
| Beauty & cosmetics | Bubble, pastel colors | Cushions glass and pumps; pastel palette suits the category |
| Electronics accessories | Bubble + tamper-evident strip | Impact + visible security |
| Books & media | Poly, tight size ladder | Flat, rigid-ish contents; lowest cost per parcel |
| Jewelry & small valuables | Bubble, small sizes, interior print | Discreet outer + cushioning + unboxing note |
| Subscription boxes | Poly, signature color, monthly interior promo | Recognition and retention loop in one film |
| Marketplace resellers | Poly, 1-color print or plain | Volume economics; upgrade path when brand grows |
Poly Mailer vs. Bubble Mailer vs. Corrugated Box
| Dimension | Poly Mailer | Bubble Mailer | Corrugated Box |
|---|---|---|---|
| Cost per unit | Lowest | Low–medium | Highest |
| Shipping weight | Lightest | Light | Heaviest — dimensional weight pricing hurts |
| Puncture / tear resistance | Excellent (co-ex layers) | Good outer, soft body | Excellent structure |
| Cushioning | None | Built-in | Needs void fill |
| Packing speed | Seconds — one press | Seconds — one press | Slowest (tape, fill) |
| Storage footprint | Rolls — smallest | Flat stacks | Bulkiest |
| Brand impact | Colored + printed faces | Printed outer + inner flap | Full print, highest perceived value |
| Water resistance | Excellent | Good | Poor unless coated |
| Best role | Soft goods volume shipping | Fragile small items | Premium & very fragile orders |
Program advice: route soft goods to poly mailers, fragile smalls to bubble mailers, and reserve boxes for premium or very fragile orders. Most brands can move 60–80% of volume out of boxes into mailers — cutting freight and packing time simultaneously.
Eco Options
| Option | What It Is | Right Choice When |
|---|---|---|
| Recycled PE (30–100%) | Post-use PE re-granulated into co-ex film | Best cost-eco balance; black/grey inner layers hide recyclate color naturally |
| Compostable PBAT+PLA | EN 13432 industrial-compostable film | Brand-positioning eco lines; note shorter shelf life and higher cost |
| Paper bubble mailers | Paper outer + paper-cushioning or PE bubble | Plastic-reduction commitments; curbside-recyclable story |
| Down-gauged co-ex | Same strength, less film per mailer | Always worth quoting — same protection, lower cost and plastic |
| Right-sizing program | Tighter size ladder from order data | The greenest option is the material you never ship |
Frequently Asked Questions
What is the MOQ, and can I really order just one roll?
Yes — one roll for stock colors, sizes and styles. Both mailer styles run on continuous high-speed lines with no molds, so a stock-spec roll carries almost no setup cost. Custom colors, sizes and printing are quoted at small-run minimums; flexo plates are inexpensive and stored free for your re-orders.
Poly mailer or bubble mailer — which do I need?
If it can’t break (apparel, books, soft goods): poly mailer. If it can rattle, crack or chip (cosmetics with glass, electronics, ceramics): bubble mailer. Most e-commerce operations stock both and route by product line.
Can you print inside the mailer too?
Yes — interior flap printing is one of our most popular options. A thank-you message, care instructions or a promo code printed inside the flap lands exactly at the unboxing moment. Send the artwork and we quote it together with the outer print.
Can you match our brand color?
Yes. Mailer film is produced with Pantone-matched masterbatch — the color is in the film, not a printed layer, so it won’t scratch off. We produce a film sample for approval before the full run.
Are the mailers strong enough for automated sorting?
Yes — the co-extruded film is tear- and puncture-resistant and the seals are tested stronger than the film itself. For sharp-cornered contents we recommend sizing up or adding corner protection at the contact points.
Is the closure resealable?
The standard strip is permanent self-seal — it cannot be reopened without visible damage, which doubles as tamper evidence. A resealable strip option is available for exchange-heavy categories.
Do you offer recycled or compostable mailers?
Yes: recycled PE from 30% to 100% content (the grey/black inner layer hides recyclate color naturally), EN 13432 compostable PBAT+PLA, and paper bubble mailers for curbside-recyclable programs.
How do I choose the right size?
Width = product width + 2–3 cm; length = product length + flap + ~5 cm. If you send us your top 10 SKUs with dimensions, we propose a size ladder that covers ~80% of orders with the fewest mailer types.
What is the lead time?
7–15 days after artwork and spec approval. Free stock samples ship immediately; printed pre-production samples follow artwork approval.
OEM & Our Services
JAJA Packing is a packaging supply-chain integrator based in Huzhou, China, coordinating 1,200+ audited partner factories. One accountable contact handles spec development, sampling, QC and export — from a single sample roll to full containers.











